Skip to main content

A quantitative study on the formation of Pseudomonas aeruginosa biofilm

Abstract

Biofilms are bacterial cells in a matrix of extracellular polymeric substance. The formation of biofilm depends on the microenvironment. In this study, the effect of temperature on Pseudomonas aeruginosa biofilm formation was evaluated with respect to three parameters—the mass of biofilm formed, the production of extracellular polysaccharide and the adhesion force. The results indicate that biofilm biomass (2.8, A590), extracellular polysaccharide production (1240 ± 40 µg) and adhesion force (10.8 ± 0.2 nN) were highest at 37°C. The results also suggest that biofilms formed at 37°C would have a higher mechanical stability (than biofilms grown at 28, 33 and 42°C).

Background

Power plants and large scale industries are located near water bodies because of their need for large amounts of water (for use as coolant). The discharge from soap industries results in the accumulation of sodium palmitate (main constituent of soaps) in these water bodies. When the magnesium ions (present in water bodies) react with sodium palmitate, magnesium palmitate is formed. Bacterial cells use magnesium palmitate as a carbon source for their growth and development (Ashwin et al. 2014). This results in the formation of biofilms since microorganisms exist predominantly as biofilms in water bodies (Costerton et al. 1995). The discharge (of water used as coolant) raises the temperature of the water body in the immediate vicinity of the mixing zone, thereby forming a temperature gradient in the water body (Langford 1990). The formation of a temperature gradient imparts a thermal stress on the bacterial cells, which ultimately influences the formation of biofilm.

Hostacka et al. (2010) reported the effect of temperature on formation of Pseudomonas aeruginosa biofilm by estimating the biomass of biofilm formed. Recently, Zhou et al. (2014) reported the effect of temperature on formation of P. aeruginosa biofilm by estimating the concentration of polysaccharide and protein concentration in biofilm. However a study on the effect of temperature on adhesion force and surface topography of P. aeruginosa biofilm is lacking. In this study, the effect of temperature on P. aeruginosa biofilm formation was evaluated with respect to three parameters—the mass of biofilm formed, the production of extracellular polysaccharide and the adhesion force. In addition, surface topography of biofilm was also evaluated.

Methods

The organism P. aeruginosa (MTCC 2297) was chosen since it is a model organism used in biofilm research. P. aeruginosa grows over a wide range of temperatures. The media for formation of biofilm consisted of M9 minimal media with 1% (w/w) magnesium palmitate as the carbon source (Ashwin et al. 2014). Magnesium palmitate was prepared according to the procedure given by Quraishi et al. (2012). Equimolar concentration of palmitic acid and potassium hydroxide were mixed and the suspension was heated continuously to yield potassium palmitate. Magnesium chloride, in slight excess of what was required for the stoichiometric reaction, was added to the solution. The product was then cooled and the precipitate was filtered and washed with water and acetone. Magnesium palmitate thus obtained was dried to constant weight.

The samples for inductively coupled plasma (ICP) analysis (to determine the concentration of metal ions) were prepared according to the protocol given by Cruz et al. (2011). The biofilm sample was centrifuged at 12,500g for 15 min and then acid digested in concentrated nitric acid for 1 h. The supernatant (of the digested sample) was diluted using double distilled water and the metal concentration was determined using ICP optical emission spectrometry (Perkin Elmer Optima 5300 DV).

Biofilm biomass was estimated using the protocol of Merritt et al. (2011). Biofilm samples were prepared according to the procedure given earlier (Ashwin et al. 2014). Biofilm samples were incubated in 0.1% crystal violet solution for 10 min. The samples were then rinsed with water and the bound crystal violet was extracted using 95% crystal violet. A590 of the solubilizing buffer was then measured.

The extracellular polysaccharide produced was quantified using the procedure given by Forde and Fitzgerald (1999) and Parkar et al. (2001). The cells were centrifuged at 12,500g for 15 min and were then resuspended in 5 ml of sodium hydroxide. The solution was heated for 15 min. The cells were then removed by centrifuging at 12,500g for 30 min. 99.9% (v/v) ethanol was added to the supernatant and incubated at 40°C to precipitate the polysaccharides. The precipitated polysaccharides were then dissolved again in 10 ml of sterile water. To 1 ml of this sample, 8 ml of 98% (v/v) sulphuric acid was added and the mixture was cooled for 10 min. 1 ml of 1% (w/v) of cold tryptophan was added to this mixture and heated for 15 min to effect hydrolysis. The amount of polysaccharide was then estimated by measuring A500. AFM images of biofilm were resolved in air using JPK Nanowizard II. The images were acquired in contact mode using Mikromasch CSC38 probes (Additional file 1: Figure S1). The spring constant of the cantilevers used were 0.03 N/m (Ashwin et al. 2014). A total of eight force-distance curves (on each biofilm sample) were generated to evaluate the biofilm adhesion force. A typical force curve is given (Additional file 2: Figure S2). All experiments were performed in triplicate.

Results and discussion

The effect of temperature on P. aeruginosa biofilm formation was evaluated with respect to three parameters—the mass of biofilm formed, the production of extracellular polysaccharide and the adhesion force. Quantification of biofilm biomass was done using the dye crystal violet (Merritt et al. 2011). Biofilm biomass formed at temperatures 28, 33, 37 and 42°C were 1.25 (O.D), 2.20 (O.D) 2.80 (O.D) and 2.30 (O.D) respectively (Table 1). The results show that biofilm biomass was highest for biofilm sample formed at 37°C. This is due to increased production of extracellular matrix material by P. aeruginosa cells at 37°C.

Table 1 Biofilm formation evaluated at different growth temperature supporting information

Adhesion force of biofilm is a measure of adhesiveness of biofilm (probe-biofilm interaction force). Adhesion force of biofilm grown at 28, 33, 37 and 42°C were 4.7, 5.4, 10.8 and 6.6 nN respectively (Table 1).

The results indicate that biofilm adhesion force was highest for biofilm sample formed at 37°C. This is due to increased production (and accumulation) of extracellular matrix material by P. aeruginosa cells at 37°C (Ashwin et al. 2014; Oh et al. 2007, 2009; Fang et al. 2000). The increased production of extracellular polymeric material is due to higher metabolic rate of P. aeruginosa cells at 37°C.

Extracellular polysaccharides play an important role in biofilm formation since it is only when extracellular polysaccharides are produced that cell aggregation and biofilm formation occur. This is because the extracellular polysaccharides act as ‘cement’ in holding the cells together (Sutherland 2001).The amount of extracellular polysaccharide produced by P. aeruginosa cells grown at 28, 33, 37 and 42°C were 890, 1,210, 1,570 and 1,240 µg respectively (Table 1). The results show that extracellular polysaccharide production was highest for biofilm sample formed at 37°C.

The higher amount of calcium and magnesium ions incorporated in the biofilm (formed at 37°C: Table 1) suggests that biofilm (formed at 37°C) would have a higher mechanical stability (than biofilms grown at 28, 33 and 42°C). This is because calcium and magnesium ions have been reported to bind with negatively charged polysaccharides and have also been implicated in cell–cell binding mechanisms (Korstgens et al. 2001; Lattner et al. 2003).

Surface topography of biofilm was characterized by evaluating its surface roughness. Surface roughness of biofilm is an important parameter that is characteristic of growth conditions and has been reported to have an effect on the rate of diffusion of nutrients, thickness of dissolved oxygen boundary layer and mass transfer resistance (Zhang et al. 1994). Surface roughness of biofilm was evaluated using parameter Ra. This parameter measures the arithmetic average of deviation about the mean profile line (Ashwin et al. 2014). Table 1 also shows that biofilm sample grown at 28°C had the highest surface roughness, although no specific trend was observed. This indicates that growth temperature has a significant effect on the surface topography of P. aeruginosa biofilm.

The aforementioned results show that P. aeruginosa biofilm (strain MTCC 2297) formed at 37°C produce higher amount of extracellular polysaccharide and also have a higher biomass, higher adhesion force and greater mechanical stability than biofilms formed at other temperatures (in the temperature range 28–42°C).

Conclusion

The effect of temperature on P. aeruginosa biofilm formation was evaluated with respect to three parameters—the mass of biofilm formed, the production of extracellular polysaccharide and the adhesion force. The results indicate that biofilm biomass (2.8, A590), extracellular polysaccharide production (1240 ± 40 µg) and adhesion force (10.8 ± 0.2 nN) were highest at 37°C. The results also suggest that biofilms formed at 37°C would have a higher mechanical stability (than biofilms grown at 28, 33 and 42°C). The results indicate that temperature has a significant effect on formation of P. aeruginosa biofilm.

References

  • Ashwin K, Latha KS, Vinatha K, Kothai T, Ramalingam S, Gautam P (2014) Nanoscale investigation on Pseudomonas aeruginosa biofilm formed on porous silicon using atomic force microscopy. Scanning 36:551–553

    Article  Google Scholar 

  • Costerton JW, Lewandowski Z, Caldwell DE, Korber DR, Lappin-Scott HM (1995) Microbial biofilms. Ann Rev Microbiol 49:711–745

    Article  Google Scholar 

  • Cruz LF, Cobine PA, Fuente L (2011) Calcium increases Xylella fastidiosa surface attachment, biofilm formation and twitching motility. Appl Environ Microbiol 78:1321–1331

    Article  Google Scholar 

  • Fang HHP, Chan KY, Xu LC (2000) Quantification of bacterial adhesion forces using atomic force microsopy. J Microbiol Methods 40:89–97

    Article  Google Scholar 

  • Forde A, Fitzgerald GF (1999) Analysis of exopolysaccharide (EPS) production mediated by the bacteriophage adsorption blocking plasmid, pCI658, isolated from Lactococcus lactis ssp. Cremoris HO2. Int Dairy J 9:465–472

    Article  Google Scholar 

  • Hostacka A, Ciznara I, Stefkovicova M (2010) Temperature and pH affect the production of bacterial biofilm. Folia Microbiol 55(1):75–78

    Article  Google Scholar 

  • Korstgens V, Flemming HC, Wingender J, Borchard W (2001) Influence of calcium ions on the mechanical properties of a model biofilm of mucoid Pseudomonas aeruginosa. Water Sci Technol 43:49–57

    Google Scholar 

  • Langford TE (1990) Ecological effects of thermal discharges. Elsevier, London

    Google Scholar 

  • Lattner D, Flemming HC, Mayer C (2003) 13C-NMR study on the interaction of bacterial alginate with bivalent cations. Int J Biol Macromol 33:81–88

    Article  Google Scholar 

  • Merritt JH, Kadouri DE, Toole FA (2011) Growing and analyzing static biofilms, in current protocols in microbiology. Wiley, New York

    Google Scholar 

  • Oh YJ, Jo W, Yang Y, Park S (2007) Influence of culture conditions on Escherichia coli O157:H7 biofilm formation by atomic force microscopy. Ultramicroscopy 107:869–874

    Article  Google Scholar 

  • Oh YJ, Lee NR, Jo W, Jung WK, Lim JS (2009) Effects of substrates on biofilm formation observed by atomic force microscopy. Ultramicroscopy 109:874–880

    Article  Google Scholar 

  • Parkar SG, Flint SH, Palmer JS, Brooks JD (2001) Factors influencing attachment of thermophilic bacilli to stainless steel. J Appl Microbiol 11:675–685

    Google Scholar 

  • Quraishi MA, Kumar V, Singh BN, Singh SK (2012) Calcium palmitate: a green corrosion inhibitor for steel in concrete environment. J Mater Environ Sci 3(6):1001–1008

    Google Scholar 

  • Sutherland IW (2001) Biofilm exopolysaccharides: a strong and sticky framework. Microbiology 147:3–7

    Google Scholar 

  • Zhang TC, Bishop PL, Gibbs T (1994) Effect of roughness and thickness of biofilms on external mass transfer resistance. In: Critical issues in water and wastewater treatment, pp 593–600

  • Zhou L, Xia S, Zhang Z, Ye B, Xu X, Gu Z et al (2014) Effects of pH, temperature and salinity on extracellular polymeric substances of Pseudomonas aeruginosa biofilm with N-(3-Oxooxtanoyl)-l-Homoserinel Lactone addition. J Water Sustain 4(2):91–100

    Google Scholar 

Download references

Authors’ contributions

AK carried out the experiments. AK and PG drafted the manuscript. Both authors have read and approved the final manuscript.

Acknowledgements

The authors would like to thank the Department of Biotechnology and Department of Science and Technology for their continued financial support. The funding agency had no role in the design of experiments, data collection and analysis, decision to publish or preparation of the manuscript.

Compliance of ethical guidelines

Competing interests The authors declare that they have no competing interests.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Ashwin Kannan or Pennathur Gautam.

Additional files

Additional file 1:

Figure S1. AFM (Vertical Deflection) images of biofilm formed at different temperatures: A- 28°C. B- 33°C. C- 37°C. D- 42°C.

Additional file 2:

Figure S2. A typical force curve.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kannan, A., Gautam, P. A quantitative study on the formation of Pseudomonas aeruginosa biofilm. SpringerPlus 4, 379 (2015). https://doi.org/10.1186/s40064-015-1029-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s40064-015-1029-0

Keywords